RRC-330 Reel to Reel Label Counter

RRC-330 ACH Reel to Reel Label Counting System

£1,195.00£1,295.00

For an accurate and up-to-date price for this product please contact us.

Clear
SKU: 10a7cdd970fe Category:

Product Description

RRC-330 ACH Reel to Reel Label Counting System – Labelmate

The RRC-330 Reel-to-Reel Counting System brings you new convenience in a self-contained table-top Label Counting System using a pre-set counter. The RRC-330 accepts rolls with a maximum size of 330mm (13”). The optional built-in encoder allows length measurement and offers direct read-out in Metric or British & American Units.

RRC-330: Accepts roll with a maximum outer diameter of 330mm. Take-up shaft is available both in Standard and Adjustable Core Holder. The Standard take-up shaft is available is 38, 40, 44, 70 and 76mm. The ACH (Adjustable Core Holder) accepts cores from 25 to 101mm. The supply core is supplied in both 40mm and 76mm (other core diameters available on-demand).

The PC-1 Label Counter is a popular option on our S-100 and S-200 Label Slitters. Many times, however, users don’t need to slit labels, just count them. To save users money, LABELMATE has introduced two Label Counters and Counting Stations based on the S-100 and S-200 Slitter chassis but without the Slitter function. The COUNT-100 and COUNT-200 will handle label webs up to 170 mm and 255 mm (6.5- and 10-inches) wide respectively. A CAT-3 Rewinder pulls the labels through the counter. The versatile Counters can be used at the output of a printer, or can be used with an UCAT Unwinder and a CAT-3 Rewinder to form a stand-alone off-line label inspection / counting station.

Counters

The COUNT-100 and COUNT-200 Counters can count up, or count up to a preset count as you wish. If desired, when the pre-set count is reached, the COUNT-100 and COUNT-200 can send a “HALT” signal to the CAT-3 Rewinder, causing it to stop.

The counter sensor itself is a state-of-the-art infra-red transmissive device that shines through the label web and detects the gap between successive labels. There is a sensitivity control to adjust for different kinds of label webs. Create your counting station by adding the Rewinder and Unwinder of your choice to the COUNT-100 or COUNT-200.

The RRC-300-U, RRC-330, COUNT-100 and COUNT-200 are backed by LABELMATE’s famous 3-Year Parts and Labor Limited Warranty, assuring you trouble-free performance.

 

RRC-300-U UNIVERSAL REEL-TO-REEL COUNTING SYSTEM
MODEL
ADD SUFFIX
DESCRIPTION
LABEL WIDTH(mm)
ROLL DIAM.(mm)
SPEED*
RRC-300-U
STANDARD
Self-contained Counter System with 90-250VAC, 50-60Hz, 60VA Universal Power Supply.40 & 76mm for the supply core and take-up shaft, (other diameters on demand).
152
330
Min.: 65cm/sec
ACH
Self-contained Counter System with 90-250VAC, 50-60Hz, 60VA Universal Power Supply.40 & 76mm for the supply core. Adjustable Core Holder (25mm to 101mm) for the take-up shaft.
152
330
Min.: 65cm/sec

* Minimum speeds are specified with a 76mm take-up core.

RRC-330 REEL-TO-REEL COUNTING SYSTEM

 

MODEL
ADD SUFFIX
DESCRIPTION
LABEL WIDTH(mm)
ROLL DIAM.(mm)
SPEED*
RRC-330
STANDARD
Self-contained Counter System with 90-250VAC, 50-60Hz, 60VA Universal Power Supply.40 & 76mm for the supply core and take-up shaft, (other diameters on demand).
152
330
Min.: 65cm/sec
ACH
Self-contained Counter System with 90-250VAC, 50-60Hz, 60VA Universal Power Supply.40 & 76mm for the supply core. Adjustable Core Holder (25mm to 101mm) for the take-up shaft.
152
330
Min.: 65cm/sec

* Minimum speeds are specified with a 76mm take-up core.

RRC-330 REEL-TO-REEL COUNTING SYSTEM OPTIONS
 
MODEL
DESCRIPTION
ENC
Optional built-in encoder for length measurement.
Resolution: 4.4mm
Direct read-out in Metric or British & American Units.
PS-RRC
230V – 50Hz AC Power Supply for RRC-250 and RRC-330.
Output: 24V – 4.17A. Included with RRC-250 and RRC-330.
NO COUNTER
RRC without counter for simple reel-to-reel operations

 

COUNTERS

MODEL
DESCRIPTION
LABEL WIDTH(mm)
COUNT-100
PC-1 Preset Counter mounted on chassis with guides to position label web through sensor gap. Adjustable counter sensitivity. Counts single / multi-across labels or preset batch size. Can stop Rewinder (CAT-3) automatically when job is finished.
170
COUNT-200
Same as COUNT-100 with wider width capacity.
255

NOTE: Requires a CAT-3 Rewinder to pull your labels through the Counter. Can also be used with a Label Unwinder to form a complete off-line label counting and manual inspection station. No slitting function is included.

Additional Information

Counter

Counter, No Counter